CD Face (Silkscreen) Template
Outer Diameter . . . . . . . . . .116 mm
Silver Area . . . . . . . . . . . . . .38-116 mm
Inside Diameter . . . . . . . . . .20 mm
Mirror Band Outer Edge Dia. .48 mm
Note: Keep all fine/important/knockout text and images outside mirror band.

- Print in white areas only (see diagram).
- Keylines should not appear on film.
- Center Knockout (48 mm) is NON-PRINTABLE.
Printing on CDs
- Spot colors screen printed at 85 lpi.
- CMYK process (or 5 color adding a white base) printing is also available at 100 lpi.
Note: Colors appear differently on silver than when printed over a solid white layer of ink.
Design Guidelines
- For knockouts, minimum line width is 0.75 and font size is 6pt BOLD. For process color, a high quality color proof must be included (inkjet prints not recommended).
- Separation tonal ranges should be no less than 15% and no greater than 85%.
- Minimum line width is 0.5 pt and font size is 5 pt. BOLD.
- For knockouts, minimum line width is 0.75 and font size is 6 pt BOLD.
- For process color, a high quality color proof must be included (inkjet prints not reocmmended).

CD Face (Black Thermal) Template
Outer Diameter . . . . . . . . . .114 mm
Silver Area . . . . . . . . . . . . . .38-116 mm
Inside Diameter . . . . . . . . . .20 mm
Mirror Band Outer Edge Dia. .48 mm
Note: Keep all text and images outside mirror band.

- Print in white areas only (see diagram).
- Keylines should not appear on film.
- Center Knockout (48 mm) is NON-PRINTABLE.
Design Guidelines
- Total ink coverage must be 30% or less.
- Text and images must be solid black. Gradients, screens and halftones will not print as desired
- Large areas of solid black are NOT recommended
- Minimum line width is 0.5 pt and font size is 5 pt. BOLD

CD Face (Color Thermal) Template
Outer Diameter . . . . . . . . . .119 mm
Silver Area . . . . . . . . . . . . . .38-116 mm
Inside Diameter . . . . . . . . . .20 mm
Mirror Band Outer Edge Dia. .48 mm
Note: Keep all text and images outside mirror band.

- Print in white areas only (see diagram).
- Keylines should not appear on film.
- Center Knockout (20 mm) is NON-PRINTABLE.
- Text and important graphics should be placed outside of the 24 mm center.
Design Guidelines
- Minimum line width is 0.5 pt and font size is 5 pt. BOLD

CD/DVD Face (Offset) Template
Outer Diameter . . . . . . . . . .116 mm
Silver Area . . . . . . . . . . . . . .38-116 mm
Inside Diameter . . . . . . . . . .23 mm
Mirror Band Outer Edge Dia. .48 mm
Note: Keep all fine/important/knockout text and images outside mirror band.

- Print in white areas only (see diagram).
- Keylines should not appear on film.
- Center Knockout (28 mm) is NON-PRINTABLE.
Printing on CDs/DVD
- CMYK process (or 5 color adding a white base)
- Colors appear differently on silver than when printed over a solid white layer of ink
Design Guidelines
- A high quality color proof must be included (inkjet prints not reocmmended).
- Minimum line width is 0.5 pt and font size is 5 pt. BOLD.
- For knockouts, minimum line width is 0.75 and font size is 6 pt BOLD.

Jewel Case Insert -2 Panels
- Actual cover size is 4.75 x 4.75"
- Supplied graphics should be 5.0 x 5.0" to allow for bleed edge
- The 5x5 graphics will be centered inside of a 4.75" square
- Each side should be saved as it's own file.


Jewel Case 8-Page Booklet
6pp Insert Template
- Actual cover size is 9.50" x 4.75"
- Supplied graphics should be 9.75" x 5.0" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Each side should be saved as it's own file.
- Layout should follow "printer spread" chart in template


CD Jewel Case Tray Card Template
Suggestions for high quality design work:
- Look at as many other CD packages as you can to get ideas for
layout.
- Text should be supplied on a CD or through our FTP site. This will save time
on typesetting and allow more time for design.
- All graphics should be supplied with your order form.
- Photos and logos should be clean and sharp and preferably larger
than final size, but preferably no larger than 8.5" x 14".
- After you print this page you may paste or tape copies of logos
or photos onto it to specify position.
- Images supplied as computer files should be in a TIFF or EPS
format.
- Recommended resolution for computer files is 300 dpi for grayscale/color,
600 dpi for JPEG or TIF at final size.
- Be sure of all text before submitting this form. Changes will
take extra time and may incur additional charges.
- Recommended layout: Tray card should include Artists' logo,
selection title and image(s). Inside panels should include credits,
lyrics, contact information, etc.

CD Digi Case 4 Panel Template for 1-CD Duplication
- Actual cover size (folded) is approximately 5.32 x 4.94"
- Supplied graphics should be 11.56 x 10.125" to allow for bleed edge
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


CD Digi Case 4 Panel Template for 2-CD Duplication
- Actual cover size (folded) is approximately 5.52 x 4.94"
- Supplied graphics should be 11.749" x 10.125" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


CD Digi Case 6 Panel Template (Tray Right) (1 Spine)
- Actual cover size (folded) is approximately 5.52 x 4.94"
- Supplied graphics should be 17.544" x 10.125" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


CD Digi Case 6 Panel Template (Tray Right) (2 Spine)
- Package contains 6 panels, 2 spines and one tray on inside, right panel
- Actual cover size (folded) is approximately 5.6" x 4.936"
- Supplied graphics should be 17.53" x 10.123" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


CD Digi Case 6 Panel Template (Tray Center) (2 Spine)
- Package contains 6 panels, 2 spines and one tray on inside, center panel
- Actual cover size (folded) is approximately 5.6" x 4.936"
- Supplied graphics should be 17.53" x 10.123" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


CD Mini Jacket Template
- Actual cover size (folded) is approximately 5.065" x 4.954"
- Supplied graphics should be 10.344" x 5.219" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds and .25" from far left cut line for digitally printed packages
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each pan


1 CD Cardboard Wallet Template
- Actual cover size (folded) is approximately 5.25" x 5.25"
- Supplied graphics should be 16.217" x 10.687" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each pane


2 CD Cardboard Wallet Template
- Actual cover size (folded) is approximately 5" x 5"
- Supplied graphics should be 10.4" x 10.25" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each pan


6 Panel Cardboard Wallet
- Package contains two pockets, each with one open end and one closed end for disc and booklet or 2 discs.
- Actual cover size (folded) is approximately 5.1867" x 5.1234"
- Supplied graphics should be 15.998" x 10.468" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


4 Panel Cardboard Tube Package
- Package contains 2 open ended pockets for one disc and a book or insert or 2 discs
- Actual cover size (folded) is approximately 5.1273" x 5.06"
- Supplied graphics should be 10.7068" x 10.3607" to allow for bleed edge
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel


4-Panel 2 CD Cardboard Wallet
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel

Download Templates |
JPEG |
Illustrator
|
Photoshop
PSD |
|
  |
  |
Download
|
Download
|
Download
|
If the template format you require is not listed here, please call us at 603-890-8996 or
email us. We are currently developing templates in InDesign and will be happy to build and send you whatever you require. |

6-Panel 1 CD Cardboard Wallet
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel

Download Templates |
JPEG |
Illustrator
|
Photoshop
PSD |
|
  |
  |
Download
|
Download
|
Download
|
If the template format you require is not listed here, please call us at 603-890-8996 or
email us. We are currently developing templates in InDesign and will be happy to build and send you whatever you require. |

4-Panel Digipack w/ Tube Pocket
- All text and important images should be at least .125" inches from all cuts and folds
- The oversized graphics will be centered inside of print area
- Save layout as one file
- Verify the direction and orientation of each panel

Download Templates |
JPEG |
Illustrator
|
Photoshop
PSD |
|
  |
  |
Download
|
Download
|
Download
|
If the template format you require is not listed here, please call us at 603-890-8996 or
email us. We are currently developing templates in InDesign and will be happy to build and send you whatever you require. |
Copyright ©2023 Superdups®
|