
DVD Silkscreen
DVD Silkscreen Specs
Outer Diameter . . . . . . . . . .116 mm
Silver Area . . . . . . . . . . . . . .34-116 mm
Inside Diameter . . . . . . . . . .20 mm
Mirror Band Outer Edge Dia. .45 mm
Note: Keep all fine/important/knockout text and images outside mirror band.
- Print in white areas only (see diagram).
- Keylines should not appear on film.
- Center Knockout (38 mm) is NON-PRINTABLE.
Printing on DVDs
- Spot colors screen printed at 85 lpi.
- CMYK process (or 5 color adding a white base) printing is also available at 100 lpi.
Note: Colors appear differently on silver than when printed over a solid white layer of ink.
Film Specs
- Right Reading, Positive Film, Emulsion Up, 85 lpi, Elliptical Dots
- Registration marks are required on each piece of film at top, bottom, left, right at 1. to 1 1/2. from disc outer edge. The registration mark line width is to be 0.25 pt max and 21 mm long.
- The film must also have four Kammen dots 2 mm in dia., 63.5 mm from the center of the disc and 90o apart starting at 45o from vertical center-line of the image.
- Indicate the Top of each piece of film as well as specify the Color and Printing order. Specify ONLY CV inks from the Pantone Color Matching System.
Design Guidelines
- Separation tonal ranges should be no less than 15% and no greater than 85%.
- Minimum line width is 0.5 pt and font size is 5 pt. BOLD.
- For knockouts, minimum line width is 0.75 and font size is 6 pt BOLD. For process color, a high quality color proof must be included (inkjet prints not reocmmended).

DVD Amaray™ Case Wrap Template

|

DVD Amaray™ Booklet Templates


DVD Amaray™ 1 Page Insert Templates
1 Sided Printing
- Actual insert size is 5.0 x 7.25"
- Supplied graphics should be 5.25 x 7.5" to allow for bleed edge
- The 5.25 x7.5 graphics will be centered inside of a 5.0 x 7.25" area

|